沖壓托輥軸承座一般由內圈、外圈、沖壓體與保持架等四部分構成。內圈的效果是與軸相配合并與軸一同旋轉；外圈效果是與軸承座相配合，起支撐效果；沖壓體是借助于保持架均勻的將沖壓體散布在內圈和外圈之間，其形狀巨細和數量直接影響著沖壓軸承的使用功能和壽數；保持架能使沖壓體均勻散布，避免沖壓體掉落，引導沖壓體旋轉起光滑效果。雙列向心球面球軸承和雙列向心球面滾子軸承具有杰出的調心功能。滾子軸承和滾針軸承不答應內、外圈軸線有相對歪斜。州苗木 保定通風管道 絲網立柱模具 尼龍輸送帶 保定空壓機 高碑店養老院各類沖壓軸承答應的歪斜角不一樣，如單列向心球軸承為8′～16′,雙列向心球面球軸承為2°～3°，圓錐滾子軸承≤2′。與滑動軸承對比，沖壓軸承的徑向尺度較大，減振才能較差，高速時壽數低，動靜較大。軸中心線相對軸承座孔中心線歪斜時，軸承仍能正常作業的才能。
The stamping roller bearing seat is generally composed of four parts: the inner ring, the outer ring, the stamping body, and the cage. The effect of the inner ring is to match and rotate with the shaft; The outer ring effect is matched with the bearing seat to provide support; The stamping body is evenly distributed between the inner and outer rings using a retainer, and its shape, size, and quantity directly affect the use function and lifespan of the stamping bearing; The holder can evenly distribute the stamping body, prevent it from falling, and guide it to rotate smoothly. Double row radial spherical ball bearings and double row radial spherical roller bearings have outstanding centering functions. Roller bearings and needle roller bearings do not allow relative deviation of the inner and outer ring axes. The allowable deviation angles for various types of stamped bearings are different, such as 8 '-16' for single row radial ball bearings, 2 ° -3 ° for double row radial spherical ball bearings, and ≤ 2 'for tapered roller bearings. Compared with sliding bearings, stamped bearings have a larger radial scale, poor vibration reduction ability, low lifespan at high speeds, and larger dynamic and static characteristics. When the centerline of the shaft is skewed relative to the centerline of the bearing seat hole, the bearing can still operate normally.